capstans for low production speeds

caterpillar

  • capstans for low production speeds caterpillar
  • capstans for low production speeds caterpillar
  • capstans for low production speeds caterpillar
  • capstans for low production speeds caterpillar
  • capstans for low production speeds caterpillar
  • capstans for low production speeds caterpillar

Description

  • pneumatic belt tension
  • belt material adapted to customer requirements
  • contact pressure pneumatically adjustable
  • synchronous operation via electric shaft
  • optionally with automatic centering
  • optionally with belt cross adjustment to minimize wear

General specifications

The following parameters are a general overview and apply to different versions of the product. For detailed practical examples, please see the product examples below. We will be pleased to realise deviating requirements on the basis of your specifications.

pull-off speedmax. 300 m/min.

pull-off force100 - 6000 N

product Ø1 - 60 mm

contact pressure length160 - 1800 mm

belt width25 - 350 mm

Product examples

AZ-R-160-100 CATERPILLAR
AZ-R-160-100 CATERPILLAR
  • Compact construction
  • Upper track band opens pneumatically
  • Clamp pressure very fine adjustable via fine pressuere regulator
  • Lower track band fixed
  • Upper and lower track band fitted with bruschless servomotor
  • Band with Linatex-coating
  • Product feed-in point fitted with ceramic guide
  • belt tension adjustable via setscrew
  • protective covers with protective cap an safety bolt
  • Height-adjustable stand (tube in tube)
  • Seperate electrical cabinet fitted to stand

Gripping lengthca. 160 mm

Belt width70 mm

Product Ø1,0 - 15,0 mm

Tractive forcemax. 100 N

Speedmax. 200 m/min

Feed-through height1100 mm (adjustable +- 200 mm)

Dimensions LxBxHca. 1100 x 650 x 1570 (max. Höhe) mm

AZ-R-500-200 CATERPILLAR
AZ-R-500-200 CATERPILLAR
  • Compact construction
  • Upper track band opens pneumatically
  • Adjustment of gab between bands with arrester for upper track band adjustable via threaded spindle
  • Display gab between bands at opeator panel
  • Clamp pressure adjustable via fine pressure regulator
  • Lower track band fitted with bruschless servomotor
  • Belt tension adjustable via regulator valve
  • Protective covers with protective cap and safety bolt
  • Height-adjustable stand
  • Separate electrical cabinet fitted to stand

Gripping lengthca. 500 mm

Belt width160 mm

Product Ø1,0 - 15,0 mm

Tractive forcemax. 200 N

Speedmax. 200 m/min

Feed-through height1100 mm (adjustable +- 200 mm)

Dimensions LxBxHca. 1570 x 650 x 1100 mm

AZ-R-1000-300 CATERPILLAR
AZ-R-1000-300 CATERPILLAR
  • Compact construction
  • Upper track band opens pneumatically
  • Adjustment of gab between bands with arrester for upper track band adjustable via threaded spindle
  • Display gab between bands at opeator panel
  • Clamp pressure adjustable via fine pressure regulator
  • Lower track band fitted with bruschless servomotor
  • Belt tension adjustable via regulator valve
  • Protective covers with protective cap and safety bolt
  • Height-adjustable stand
  • Separate electrical cabinet fitted to stand

Gripping lengthca. 1000 mm

Belt width100 mm

Product Ø3,0 - 50,0 mm

Tractive forcemax. 300 N

Speedmax. 100 m/min

Feed-through height1000 mm (adjustable +- 100 mm)

Dimensions LxBxHca. 1800 x 700 x 1500 mm

AZ-R-1500 CATERPILLAR WITH ADJUSTMENT (ACROSS)
AZ-R-1500 CATERPILLAR WITH ADJUSTMENT (ACROSS)
  • Compact design
  • Lower and upper caterpillar belts are centred in the middle
  • Pneumatic lifting and lowering of lower and upper belt
  • Contact pressure of lower and upper caterpillar belt adjustable via E-P converter
  • Belt tension force adjustable via pressure regulator
  • Each caterpillar belt is driven by a three-phase servomotor
  • Synchronous running of the caterpillar belts via E-shaft function, or via current-adjusted upper caterpillar belt, in the operating mode the product must be able to transmit the corresponding force
  • Protection cover with safety locking device
  • Housing with optimized heat dissipation
  • Infeed and outfeed side guard
  • Product pass trough height 1,000mm
  • Traverse adjustment +/- 80mm manual via handwheel
  • Transport of the machine by forklift possible

Pressure length1500 mm

Belt width160 mm

Belt coatingAccording to customers request

Pulling force3000 N

Pass through height1.000 +/- 100 mm

Product diameter5 mm – 15 mm

Line speed1,0 m/min – 300 m/min

Line speed settingexternal (e.g. line control system or via HMI)

AZ-R-1800 CATERPILLAR
AZ-R-1800 CATERPILLAR
  • Compact design
  • Lower and upper caterpillar belts are centred in the middle
  • Pneumatic lifting and lowering of lower and upper belt
  • Contact pressure of lower and upper caterpillar belt adjustable via E-P converter
  • Belt tension force adjustable via pressure regulator
  • Each caterpillar belt is driven by a three-phase servomotor
  • Synchronous running of the caterpillar belts via E-shaft function, or via current-adjusted upper caterpillar belt, in the operating mode the product must be able to transmit the corresponding force
  • Protection cover with safety locking device
  • Housing with optimized heat dissipation
  • Product pass trough height 1,000mm
  • Traverse adjustment +/- 80mm manual via handwheel

Pressure length1800 mm

Belt width160 mm

Belt coatingAccording to customers request

Pulling force3000 N

Pass through height1000 +/- 100 mm

Product diameter5 mm – 40 mm

Line speed1,0 m/min – 200 m/min

Line speed settingexternal (e.g. line control system or via HMI)

{$ext.searchResultSlug}
+49 (0) 44 98 - 92 50 0 Contact persons Send us an email